Table of Contents
|
Technological Innovation for Smart Systems Luis M. Camarinha-Matos, Mafalda Parreira-Rocha, Javaneh Ramezani |
Front Matter |
Collaborative Networks
|
Supporting the Strategies Alignment Process in Collaborative Networks Beatriz Andrés, Raul Poler |
3-19 |
Service Personalization Requirements for Elderly Care in a Collaborative Environment Thais Baldissera, Luis Camarinha-Matos, Cristiano Faveri |
20-28 |
A System Dynamics and Agent-Based Approach to Model Emotions in Collaborative Networks Filipa Ferrada, Luis Camarinha-Matos |
29-43 |
Computational Intelligence
|
Efficient Fuzzy Controller to Increase Soybean Productivity Bruno Miranda, Gian Meira, Sidney Montebeller, Edinei Legaspe, Joel Pinto, Diolino Santos Filho, Paulo Miyagi |
47-54 |
A Hybrid Expert Decision Support System Based on Artificial Neural Networks in Process Control of Plaster Production – An Industry 4.0 Perspective Javaneh Ramezani, Javad Jassbi |
55-71 |
Flexibilizing Distribution Network Systems via Dynamic Reconfiguration to Support Large-Scale Integration of Variable Energy Sources Using a Genetic Algorithm Marco Cruz, Desta Fitiwi, Sérgio Santos, João Catalão |
72-80 |
Data Fusion of Georeferenced Events for Detection of Hazardous Areas Sérgio Onofre, João Gomes, João Pimentão, Pedro Sousa |
81-89 |
Systems Analysis
|
Student’s Attention Improvement Supported by Physiological Measurements Analysis Andreia Artífice, Fernando Ferreira, Elsa Marcelino-Jesus, João Sarraipa, Ricardo Jardim-Gonçalves |
93-102 |
A System for Driver Analysis Using Smartphone as Smart Sensor Rui Vilaça, Rui Araújo |
103-110 |
Multi-criteria Analysis and Decision Methodology for the Selection of Internet-of-Things Hardware Platforms Edgar Silva, Ricardo Jardim-Gonçalves |
111-121 |
Smart Manufacturing Systems
|
Dynamic Simulation for MAS-Based Data Acquisition and Pre-processing in Manufacturing Using V-REP Ricardo Peres, Andre Rocha, Jose Barata |
125-134 |
Enhancing Dependability and Security of Cyber-Physical Production Systems Hessamedin Bayanifar, Hermann Kühnle |
135-143 |
Features Extraction from CAD as a Basis for Assembly Process Planning Jan Wikander, Baha Hasan |
144-153 |
Safety Active Barriers Considering Different Scenarios of Faults in Modern Production Systems Jeferson Souza, Diolino Santos Fo, Reinaldo Squillante Jr., Fabrício Junqueira, Paulo Miyagi, Jose Silva |
154-164 |
Smart Sensorial Systems
|
Image Analysis as a Tool to Age Estimations in Fishes: An Approach Using Blue Whiting on ImageJ Patrícia Gonçalves, Vitor Silva, Alberto Murta, António Melo, Henrique Cabral |
167-174 |
Signal Processing Techniques for Accurate Screening of Wrist Fractures Ridita Ali, Lyuba Alboul, Amaka Offiah |
175-182 |
TRACEO3D Ray Tracing Model for Underwater Noise Predictions Rogério Calazan, Orlando Rodríguez |
183-190 |
Feature Transformation Based on Stacked Sparse Autoencoders for Sleep Stage Classification Shirin Najdi, Ali Gharbali, José Fonseca |
191-200 |
Embedded and Real Time Systems
|
Quality Evaluation Strategies for Approximate Computing in Embedded Systems Olaf Neugebauer, Peter Marwedel, Roland Kühn, Michael Engel |
203-210 |
Configurable Reprogramming Methodology for Embedded Low-Power Devices Ondrej Kachman, Marcel Balaz |
211-219 |
Upper Bounds Prediction of the Execution Time of Programs Running on ARM Cortex-A Systems Irina Fedotova, Bernd Krause, Eduard Siemens |
220-229 |
Energy: Management
|
Assessment of Ancillary Service Demand Response and Time of Use in a Market-Based Power System Through a Stochastic Security Constrained Unit Commitment Saber Talari, Miadreza Shafie-Khah, Neda Hajibandeh, João Catalão |
233-241 |
Self-scheduling of Wind-Thermal Systems Using a Stochastic MILP Approach Rui Laia, Isaias Gomes, Hugo Pousinho, Rui Melício, Victor Mendes |
242-250 |
Impact of Distributed Generation on the Thermal Ageing of Low Voltage Distribution Cables Gergely Csányi, Zoltán Tamus, Árpád Varga |
251-258 |
A Hybrid Anti-islanding Method for Inverter-Based Distributed Generation Ebrahim Rokrok, Miadreza Shafie-Khah, Hamid Karshenas, Esmail Rokrok, João Catalão |
259-266 |
Energy: Optimization
|
A New DG Planning Approach to Maximize Renewable - Based DG Penetration Level and Minimize Annual Loss Soroush Najafi, Miadreza Shafie-Khah, Neda Hajibandeh, Gerardo Osório, João Catalão |
269-276 |
Stochastic Optimization for the Daily Joint Operation of Wind/PV and Energy Storage Isaías Gomes, Hugo Pousinho, Rui Melício, Vitor Mendes |
277-286 |
The Impacts of Demand Response on the Efficiency of Energy Markets in the Presence of Wind Farms Neda Hajibandeh, Miadreza Shafie-Khah, Saber Talari, João Catalão |
287-296 |
Implementing an Integer Linear Approach to Multi-objective Phasor Measurement Unit Placement Amir Baharvandi, Miadreza Shafie-Khah, Saber Talari, João Catalão |
297-304 |
Distributed Infrastructure
|
RELOAD/CoAP P2P Overlays for Network Coding Based Constrained Environments Eman Al-Hawri, Noelia Correia, Alvaro Barradas |
307-315 |
PVInGrid: A Distributed Infrastructure for Evaluating the Integration of Photovoltaic Systems in Smart Grid Lorenzo Bottaccioli, Enrico Macii, Edoardo Patti, Abouzar Estebsari, Enrico Pons, Andrea Acquaviva |
316-324 |
MAP Estimator for Target Tracking in Wireless Sensor Networks for Unknown Transmit Power Slavisa Tomic, Marko Beko, Rui Dinis, Milan Tuba, Nebojsa Bacanin |
325-334 |
Solar Energy
|
Performance Assessment of Tank Fluid Purging and Night Cooling as Overheating Prevention Techniques for Photovoltaic-Thermal (PV-T) Solar Water Heating Systems Pedro Magalhães, João Martins, António Joyce |
337-347 |
Stochastic Optimal Operation of Concentrating Solar Power Plants Based on Conditional Value-at-Risk João Esteves, Hugo Pousinho, Victor Mendes |
348-357 |
Solar Thermoelectric System with Biomass Back-up José Gonçalves, Cristina Camus, Stanimir Valtchev |
358-369 |
Electrical Machines
|
A Generalized Geometric Programming Sub-problem of Transformer Design Optimization Tamás Orosz, Tamás Nagy, Zoltán Tamus |
373-381 |
Noise, Vibration and Harshness on a Permanent Magnet Synchronous Motor for a Remote Laboratory Jaime Pando-Acedo, Enrique Romero-Cadaval, Consuelo Gragera-Peña, María Milanés-Montero |
382-389 |
Levitating Bearings Using Superconductor Technology Under Smart Systems Scope Martim Carvalho, António Arsenio, Carlos Cardeira, Paulo Costa Branco, Rui Melício |
390-397 |
An Overview on Preisach and Jiles-Atherton Hysteresis Models for Soft Magnetic Materials Pedro Melo, Rui Araújo |
398-405 |
Power Electronics
|
Comparative Analysis of qZS-Based Bidirectional DC-DC Converter for Storage Energy Application Oleksandr Matiushkin, Oleksandr Husev, Kostiantyn Tytelmaier, Kaspars Kroics, Oleksandr Veligorskyi, Janis Zakis |
409-418 |
Single-Phase Wireless Power Transfer System Controlled by Magnetic Core Reactors at Transmitter and Receiver Luis Romba, Stanimir Valtchev, Rui Melício |
419-428 |
Soft-Switching Current-FED Flyback Converter with Natural Clamping for Low Voltage Battery Energy Storage Applications Roman Kosenko, Dmitri Vinnikov |
429-436 |
Electronics
|
Design Methodology for an All CMOS Bandgap Voltage Reference Circuit Ricardo Madeira, Nuno Paulino |
439-446 |
Reconfigurable Photonic Logic Architecture: An Overview Vitor Silva, Manuel Barata, Manuela Vieira |
447-462 |
Microneedle Based ECG – Glucose Painless MEMS Sensor with Analog Front End for Portable Devices Miguel Teixeira, Camilo Velez, Dian Li, João Goes |
463-478 |
Crystalline Silicon PV Module Under Effect of Shading Simulation of the Hot-Spot Condition Ruben Anjos, Rui Melício, Victor Mendes, Hugo Pousinho |
479-487 |